I drive a '99 chevy suburban, and I'll be getting new tires, as well.
2007-05-15 10:08:45 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Chevrolet
Since your Chevy Suburban does not have struts GM replacement shocks would be the best deal. If you suspect springs are sagging replace with GM trailering package springs and shocks.
Do not mess with aftermarket raising or lowering springs. Two things will happen. #1. You will never be satisfied with the ride again and #2 After all the changing you'll wind up being mad as hell.
If you really think you want to chew into this project with aftermarket springs demand that they tell you what the new spring rates actually are such as installed height, ride height, spring rate per inch of travel, wire diameter, free height wire turns. Ask any alignment shop what the chances are that the front end will ever be able to be aligned perfectly with an aftermarket suspension kit.
The suspension in your vehicle has tight limits as far as caster, camber, tow - in and ride height. If you toss in some ridiculous suspension kit are they going to guaranty that all suspension measurements will fall into spec.? I don't think so.
The companies who sell these kits usually will not say a thing concerning above.
2007-05-16 03:48:06 · answer #1 · answered by Country Boy 7 · 0⤊ 0⤋
a shop will charge prob $500-1000 for full a suspension system install
2007-05-15 17:28:06 · answer #2 · answered by Michael 2 · 0⤊ 0⤋
go to ebay.com there you will find the cheaper then outside or go to autozone or walmart always lower price or sams club now your choice or napa auto
2007-05-15 20:55:32 · answer #3 · answered by Anonymous · 0⤊ 0⤋
are we talking shocks (struts), springs, etc? i think 350ish
2007-05-15 17:21:23 · answer #4 · answered by hatrk219 3 · 0⤊ 0⤋