Anyone know what tools I need to change the front brake pads on my 1999 Mitsu Montero?

Answer 1

I not sure what type bolts it use, but, here the basic.
A large Syringe like for basting meat. It for removing any excess Brake Fluid from the Resevoiur as you will need to push the brake pads (Caliper) "ALL" the way back in. The fluid level rise as you do this. And, if you have added fluid you need to remove.
Many use a C-Clamp to press the Caliper back. I remove the brake fluid top and use a screwdriver to slowly pry the back brake as far back as possible (This not good if you not sure what you do, but, it easy). C-Clamp the professional way and used after the brakes removed.
Then you need a Star-Driver or 10-13 mm Socket or whatever the two Bolts use that hold everything on the Rotor.
Jack and Jackstand, Lug Wrench.
So, the list;
Jack
Jackstand
Lug wrench
C-Clamp
Meat Baster
Socket or wrench the fit the two bolts holding the assembly
Wire in case you need to hang it without putting pressure on the rubber hose.

Answer 2

go to advance auto repairs picturesand all info is there