50/50 mix of antifreeze and water.
2007-05-14 06:58:57
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
Check the owner's manual for the recommended type of antifreeze. If you don't have one, go to an auto parts store and they should be able to recommend one that would work in your car. In the newer cars there should be a plastic container under the hoold that has coolent levels marked on it. Fill to the full line. In most modern cars, it is best to use a antifreeze/water mixture it provided a higher boiling point and reduces the possibility of overheating the engine.
2007-05-14 07:03:39
·
answer #2
·
answered by jerry b 1
·
0⤊
0⤋
Check the owners manual. Alluminum engines require a certian type of antifreeze. Some want a 50/50 mix of antifreeze/water (distilled) Some will take pure antifreeze in the resivior
2007-05-14 06:59:06
·
answer #3
·
answered by kabster 2
·
0⤊
0⤋
Uh, engine coolant?
2007-05-14 06:56:41
·
answer #4
·
answered by Anonymous
·
0⤊
1⤋
depending on the year of the vehicle either the green antifreeze or the new one the orange antifreeze. best bet is to check your manual and the answer is in there.. hope that helps:)
2007-05-14 06:59:15
·
answer #5
·
answered by jdl1 2
·
0⤊
0⤋
the correct anti freeze. green for older cars and red for newer ones. do not mix colors in any way either!
2007-05-14 06:57:37
·
answer #6
·
answered by cadaholic 7
·
0⤊
0⤋
Antifreeze.
Check your manual---sometimes you can put regular water in, sometimes you have to use special "coolant".
2007-05-14 06:56:55
·
answer #7
·
answered by Munya Says: DUH! 7
·
0⤊
1⤋
40% anti-freeze, 60% water
2007-05-14 06:59:25
·
answer #8
·
answered by blakereik 4
·
0⤊
0⤋
...engine coolant
2007-05-14 06:56:44
·
answer #9
·
answered by danszafranek 2
·
0⤊
1⤋
buy the mixed antifreeze............ but very important..... make sure your engine is cool before putting in fluid, otherwise.............. crack! goes your engine block
2007-05-14 07:02:45
·
answer #10
·
answered by bust15nutz 3
·
0⤊
0⤋