Can I hook a wireless router to a hard wire from a wired router in the huse?

Question

I have one wired router in which cables are run frommy den to each bedroom. I wanted to know if I would be able to keep the wired router and use a wireless through one of the wires in one of the bedroom?

Answer 1

Yes, but if you run into problems with IP address you need to disable the DHCP server on the wireless router so it won't try to assign IP address to other PCs. If the DHCP server is set to auto on both routers, both routers may assign devices on your network with the same IP address and they will create problems.

Answer 2

It is best to only have one router in your network, as it only creates one DHCP server (one that assigns IP addresses). If you want to have two, each router will have to assign a different set of IPs (e.g. Router 1 assigns 192.168.1.2 to 192.168.1.99 and Router 2 assigns 192.168.2.2 to 192.168.2.99). In a local area network, the second to last number is known as the subnet. Also please note that the network on the second subnet will be isolated, and you can't see any of the second subnet's computers by specific IP from a computer on the first subnet. This is just because of the way routers are constructed, and what routers are supposed to do, and I don't know of any router that has the ability to turn its router functionality off. That said, it looks like you need an access point. They connect directly to a router, don't need a second subnet, and don't isolate the rest of your network from the new subnet, and basically just make the wired connection wireless. Because of low demand, however, an access point may be more expensive than a second router.

Answer 3

particular, it incredibly is performed regardless of the undeniable actuality that it based the router you have you would be waiting to return accross a sort of themes. interior the path of using themes I recommend that in case you do not have DHCP engaged on the router, the 2d you plug indoors the router there wont be any community verbal replace. If DHCP is disabled you could opt to verify an IP handle on the under pressure router's interface, and on the on the spot router's interface. you besides mght could opt to connect the two routers with a bypass-over cable. in case you have a Netgear or Linsys router (or any uncomplicated router) they're going to in many situations be a router/exchange. this ability that each and every and each interface is almost a metamorphosis port, and no remember what interface you connect the under pressure router to on the on the spot router it is going to all connect the comparable LAN community. It additionally enables you to stay with a common community (ethernet) cable. consequently you %. to visit the internet website of the on the spot router and furnish it an IP handle for the LAN section, that could in many situations be performed indoors the DHCP internet website or section. only verify that inspite of you do does not mess with what your IT setup. in case you're element of IT, then verify which you do no longer cut back to rubble what you have performed. i wish this permits.

Answer 4

You can indeed but why not just get a Wireless Access Point.. you dont need another router.

Answer 5

Yes I currently have my routers in that configuration and it works fine.

Answer 6

yes u can and will work fine.