2007-05-09 11:27:13 · 3 answers · asked by tylthorpe 1 in Cars & Transportation ➔ Maintenance & Repairs
Get a set of mounts for a Chevy truck that had the 350 diesel engine as this was basically a 350 olds gas enginge GM converted to diesel. The 350 and 403 mounts are interchangeble. I'm not sure what year they stopped using the 350 diesel but I think they were around in the early to mid 80's. Anyway they should work. If your truck had been a diesel this engine would have dropped in and bolted right up to everything.
2007-05-09 13:39:04 · answer #1 · answered by RED FIVE O 2 · 0⤊ 0⤋
Check with a local parts store and see what listings they have for a 403 or Olds 350 in a Chev car--should be the same mount to use in your truck. Basically, you're looking for the mount to attach on the block side to your motor and on the frame side to your truck. Have them get out a mount for the Olds motor in an Olds car and one for your truck and see what you need to match up.They may have to get out several mounts for different applications to get one that will work....hope they're patient.
2007-05-09 11:38:19 · answer #2 · answered by paul h 7 · 0⤊ 0⤋
take the mounts from the old's frame. then you will have the mounts you need.
2007-05-09 11:35:31 · answer #3 · answered by waljac6108 5 · 0⤊ 0⤋