English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I am about to start buffing an outback stake house and eventually I know they may want it stripped and waxed. I have stripped and waxed tile floor forever but not ever messed with hardwood. do you HAVE to sand after you strip or would you just run a black pad over it and take off the dirty top coats of wax and reapply a few new coats that way you don't go down to bare wood.

2007-05-07 23:17:57 · 3 answers · asked by jt 2 in Home & Garden Maintenance & Repairs

3 answers

I did cleaning and taught cleaning for 25 years You can make a mixture of ajax powder water and a bit of liquid wax and use the black pad after spraying the mix on the floor then sweep up with a fringe mop it will look good.~~

2007-05-07 23:26:10 · answer #1 · answered by burning brightly 7 · 0 0

1

2017-01-21 21:50:19 · answer #2 · answered by ? 4 · 0 0

Wax Build Up
Strip the old wax away with odorless mineral spirits or a wood floor product made for stripping wax. Use cloths and fine steel wool to remove all residue. After the floor is dry, wax and buff.

2007-05-07 23:42:07 · answer #3 · answered by Busy Bee 2 · 0 0

fedest.com, questions and answers