i have a 1991 ford aerostar well my headlights don't work, but my bright light indicator is on?

Question

i tried to change the headlights, only to find out that i got the wrong light. So i put the old one back in, they worked fine. When i tightened everything down, i went to turn the lights on, nothing. Everything else works fine. Please help

Answer 1

bad ground wire or connection to the body at the lights.

Answer 2

Early model fords are routed this way: Power from battery goes to fuse box, then headlight switch, then to (believe it or not) turn signal/brights multifunction switch (the arm on the left of the steering column that does the wipers too), then to the lights themselves. Start at the battery, if you know its good, go check the fuse, if its good, pull the headlight switch in your panel on the left (an ohmeter combined with a Haynes manual works wonders here--it can check for connectivity), then check the multifunction switch, etc. Also, was there any starnge behavior prior to them not working? i.e., wipers coming on by themselves, brights but no low-beams, vise versa? Good luck.

Answer 3

properly, there are distinctive the thank you to respond to your question. it would desire to be the bulbs begginning to burn out. they're going to burn out swifter in case you utilize them alot if youpersistent alot at evening or in simple terms choose your lights on alot. Getting them adjusted won't consistently restoration your concern. i might go out and purchase new headlights, yet once you're wanting them to polish extra and brighter, i might advise neon headlights. they are very sturdy headlights which could shine very far, yet they are in a position to get pricy.

Answer 4

Please check the fuse box and the light relay