2007-05-07 13:32:21 · 9 answers · asked by san_antonio_spurs_baby 1 in Home & Garden ➔ Cleaning & Laundry
Sounds like the indicator that determines if the lid is closed or not is stuck. Look around and see if you can find a button near the back left corner and push it a few times. The other solution may be that the load is too heavy and the machine won't operate.
2007-05-07 13:38:26 · answer #1 · answered by Jess 7 · 0⤊ 0⤋
Sometimes when you do heavy loads like towels more towels lean on one side of the tub causing an imbalance. Make sure all the towels are evenly distributed around the tub and the continue the cycle. Once the tub is back in balance it should go on again. If it goes on again and stops again, take some of the laundry out do two loads.
2007-05-07 13:57:45 · answer #2 · answered by Anonymous · 1⤊ 0⤋
Sounds like the lid switch died. On Kenmore you pop the top and bypass the switch by putting the two wire together and don't forget to unplug first and tape the bare plug in ends. If the machine starts then replace the switch.
2007-05-07 13:42:27 · answer #3 · answered by Bobo D 2 · 1⤊ 0⤋
This is a guesstamate---either the belt that turns the inside of the machine is broken, or slipped off, or something maybe wrong with the motor.
2007-05-07 15:49:50 · answer #4 · answered by SAK 6 · 0⤊ 0⤋
Check circuit breaker
2007-05-09 14:54:32 · answer #5 · answered by johnnybegood 3 · 0⤊ 0⤋
start with the easy thing first, go check the circuit breaker or fuse that goes to your washer, then try all that other stuff everyone else is suggesting.
2007-05-07 14:39:47 · answer #6 · answered by Gordon S 5 · 1⤊ 0⤋
you might also want to check the belt..if this has come off or broke the washing will not move....
2007-05-07 13:41:56 · answer #7 · answered by LeftField360 5 · 1⤊ 0⤋
sounds like to motor to me
2007-05-07 13:59:37 · answer #8 · answered by Pearlinpc 3 · 1⤊ 0⤋
pump went out
2007-05-07 13:37:55 · answer #9 · answered by skeeter195848 4 · 1⤊ 0⤋