about 24 hours or you can buy Aqua Safe a water treatment...... use just a few drops to neutralize water (declorinate) and then you can use right away.
2007-05-06 09:26:05
·
answer #1
·
answered by Sam h 6
·
0⤊
0⤋
If the water is dechlorinated then add fish straight away ... if not, leave for about 2 days - this should give enough time for your pond to gas off and take away chloromines etc!!
2007-05-06 16:27:37
·
answer #2
·
answered by Smarty 6
·
0⤊
0⤋
usually 24 hours but you can buy a conditioner to put into the pond that softens the water if you use this you only have to wait for 4 hours ask at your local fish shop,,
2007-05-06 16:49:05
·
answer #3
·
answered by colin-irene D 4
·
0⤊
0⤋
you have to leave tap water 24 hours befor putting the fish in.
2007-05-06 16:31:40
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
the pond should be running with all its chemicals and new pumps an the filter for at least 2-4weeks this is because there are important bacteria in the bio box that need to be established for the pond to run economically.
the temp should be up to heat as well and around 9-15C
2007-05-06 16:31:37
·
answer #5
·
answered by kookie 2
·
0⤊
0⤋
If you dechlorinate the water, then only long enough for the temperature to stabilize between the pond and the containers holding the fish.
MM
2007-05-06 16:22:26
·
answer #6
·
answered by magicman116 7
·
0⤊
0⤋
no time at all if you buy the store water, but tap water should be left out for 24 hours, feel the water and make sure it is cold warm enough. read up on thefish and make sure itdoesnt need a heating pad.
2007-05-06 16:57:36
·
answer #7
·
answered by Mrs. Iero <333 2
·
0⤊
0⤋
24 hours
2007-05-06 16:23:36
·
answer #8
·
answered by kate100586 3
·
0⤊
0⤋
At least 24 hours.
2007-05-06 16:22:44
·
answer #9
·
answered by *~STEVIE~* *~B~* 7
·
0⤊
0⤋
At least One Day
2007-05-06 16:28:26
·
answer #10
·
answered by grim107 2
·
0⤊
0⤋