A technician is adding an internal PnP modem to a system, but a check of system resources shows that all available IRQs are reserved or being used by other devices. What could the technician do to get the device to work?
* manually assign the IRQ of another device that is not expected to be used at the same time as the modem
* use trial and error to find an IRQ that will work with the modem
* configure the modem to work without an IRQ
* change CMOS settings to allow the BIOS to free up an unused IRQ
* configure the modem to use a DMA address instead of an IRQ
2007-05-04
12:47:40
·
6 answers
·
asked by
Pearl
2
in
Computers & Internet
➔ Hardware
➔ Add-ons