2007-05-03 22:06:26 · 11 answers · asked by buddylee_25 1 in Arts & Humanities ➔ Visual Arts ➔ Sculpture
make a branding iron cheap and quick
2007-05-03 22:15:41 · answer #1 · answered by Anonymous · 1⤊ 1⤋
For a sign to hang over your company's door, use a wood burning tool. But if you are going to do a lot of pieces of wood, I'd have a rubber stamp made to make your work easy. The rubber stamp people can make the stamp look like someone used a wood burning tool, and you could use a brown/black ink to further it's authentic look, if that pleases you. There are also lots of sign makers that can carve a sign for you.
2007-05-03 22:19:17 · answer #2 · answered by Jeanne B 7 · 0⤊ 1⤋
Yes. Get your engraver to make [carve] your company logo into a metal stamp - get stamping. Not as difficult as you might think.
Watching the 400th anniversary of the founding of the first English colony in America, Jamestown. Someone found a small metal square item, on which were stamped the words "YAMES TOWNE". Nice try. Tells you that even then things got stamped.
Company assets etc should all be stamped.
2007-05-03 22:17:21 · answer #3 · answered by Anonymous · 0⤊ 2⤋
The apostle Paul states that the natural order of things is for men to have short hair and women to have long hair, yet tradition has it that Jesus and the apostles had long hair. of course everything is relative, maybe men had long hair by today's standards but really more like medium length, and then females might have had very long hair.
2016-04-01 07:56:41 · answer #4 · answered by ? 4 · 0⤊ 0⤋
Hold your stamp in one hand and a big hammer in the other,I think you can guess the next bit.
2007-05-05 00:15:17 · answer #5 · answered by taxed till i die,and then some. 7 · 0⤊ 1⤋
sand blasting works really well I've seen some very artistic signs done this way ,they sand blast the wood away from the drawing and it looks 3d then they paint it
2007-05-03 22:21:21 · answer #6 · answered by jim m 7 · 1⤊ 0⤋
Your could burn it in, I not sure what the process is called. But you will need to get a template of your design made-up first.
2007-05-04 13:06:17 · answer #7 · answered by LoLo 1 · 0⤊ 1⤋
Why?
Just use a stamping press.
2007-05-03 22:11:38 · answer #8 · answered by Anonymous · 0⤊ 1⤋
Have you tried linolium block.The only hard thing doing that would be carving he logo backwards. Its really not that hard
2007-05-04 05:24:52 · answer #9 · answered by bmacgk 2 · 0⤊ 1⤋
have a steel punch made, use a mallot.
2007-05-03 22:09:01 · answer #10 · answered by 3am 3 · 0⤊ 1⤋