I have replaced the pick up coil. I have replaced the flywheel. $135 later the damn thing still wont give me spark. Can anyone please help me? Urgently seeking help.
2007-05-03 13:15:42 · 4 answers · asked by rick_bagby27 1 in Home & Garden ➔ Maintenance & Repairs
A 11 HP motor sounds it may be on a riding mower??? Most riders have a safety switch under the seat that cuts power to the mower in case you fall off. Make sure this switch is closed.
The magneto gap should be set to about 3 sheets of paper width (fold the sheet over twice) and place between the flywheel and coil.
2007-05-03 13:50:30 · answer #1 · answered by Anonymous · 0⤊ 0⤋
does this motor have a igniter (ingnition module) follow wire from coil to igniter and unplug see if got spark now if got spark it will be wiring problems switches etc. if no spark since u already put in new coil and replaced flywheel and new flywheel key it will probably be igniter.
2007-05-03 14:26:59 · answer #2 · answered by andy b 2 · 0⤊ 0⤋
You do have a good plug wire? And it is not grounded out? Then the gap on the pick up coil. Good luck
2007-05-03 13:28:30 · answer #3 · answered by Fordman 7 · 0⤊ 0⤋
check the gap on the magneto
2007-05-03 13:20:04 · answer #4 · answered by paul c 2 · 0⤊ 0⤋