Buying new motherboard, can I take processor from old motherboard?

Question

So here's the thing...

I'm buying a new motherboard, strictly because the one I have doesnt have a slot that fits the new video card I bought. Can I take the processor off the old motherboard (its only 2 weeks old)?

Also, will I need anything else besides RAM, sound card, and video card?

And will I lose everything I have on my pc if I switch the motherboards?

Thanks so much!

Answer 1

you need to positively identify the parts u have now and make sure the cpu socket and memory is supported on the new board ... they are not universal ... and if u switch motherboards u should reinstall windows ... it may work just plugging ur old harddrive in but you will most likely have problems ... better to backup and reload ..

Answer 2

Whether you can transfer the processor depends on which mother board and processor you have. Before purchasing the new board, make sure that your current processor will fit it. It has to have the same processor "slot" and speed as your processor.

Check the documentation for the board to see what is (and is not) onboard. You may need to add a network card, modem if needed), etc. if they are no build in to the board.

When you switch the board, you should be able to move your existing hard drive with Windows already on to the new board. You will probably have to run a CD (comes with the board) to add any drivers it will need to your hard drive.

At is possible that Windows may decide that you are no longer using the hard drive in the same computer, and will refuse to activate Windows. If that happens, you have to call Microsoft and they can issue you a new activation code for your copy of Windows. (But they will disable the old one at the same time)

Good luck!!

Answer 3

howdy...panic while the keep to procure your laptop with did not gave you a guidebook of your mom board. nicely, in actuality, your new cpu could desire to slot into the cpu socket interior the motherboard. As what you have pronounced, verify your new cpu whether that's a socket 939 cpu and what's its FSB, speed and clock. Then get your motherboard guidebook and examine for its counsel on what cpu it helps(the value,FSB and clocking). basically bear in recommendations that in the time of the experience that your new cpu has greater of any aspects than your motherboard's optimum ability, your new cpu is thoroughly incompatible. verify your motherboards specs from the e book or ask the technician the place you have offered your laptop(not the hot cpu). ok?

Answer 4

yes u can take the processor,but first u must know the ghz that ur old processor had(like 1.5 ghz) that are suitable with ur new motherboard.if u are buying the new motherboard that have higher ghz than ur processor.that cannot be"intouch" because they are not in same group.yes u can take everything in ur old motherboard to tranfers to new motherboar.but make sure it in correct slot or it neccessery .yes u may have lost all of them if u not bakcup it first in d" partition (if u have 2 partiton in ur hard disk)

seriously get the expert do this job if u don't confident.it may save ur cost to buy all whole cpu if anything wrong happen.

good luck

Answer 5

You need to make sure all the parts fit on to that new motherboard. When you take the CPU off, you need to be very very careful. To take the cooling system off of it, you will need to slide those two clips on the side, watch that the cooling system doesn't fall on the CPU. When you get the CPU off of the board you need to be careful not to bend not even one little pin on the CPU (there are millions of them) when you go to put it on the new board. If you do, you will damage and possibly fry the CPU. You will not lose your info from changing motherboards, your data is stored on the hard drive (make sure you connect it back after).