2007-05-02 23:23:00 · 27 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
i pulled off that genious by keeping my bike out in the open in a wet climate. i have a tarp, but am surrounded by a nest of thieving vermin who steal for fun rather than need. & we're (scandalously) not allowed to shoot the parasite scum for coming onto our property for nefarious purposes.
2007-05-02 23:53:53 · update #1
try chrome polish it won't leave scratches and it protects the chrome
2007-05-03 00:22:25 · answer #1 · answered by jim m 7 · 3⤊ 1⤋
Rust means the base metal which contains iron is exposed. This means the the chrome is applied with iron still being exposed which means the chrome plating was not complete as it should have been. All you can do is remove the rust with a light abrasive and use something like a paint to cover the exposed iron parts,
2016-05-19 05:34:32 · answer #2 · answered by ? 3 · 0⤊ 0⤋
Only use a light abrasive substance such as Autosol or other chrome polisher, with a lint free cloth. The best cloth you can buy.
Dont use what some people are recomending on here-some of these other recommendations are far too abrasive. Tin foil and wire wool will WRECK the chrome.Chrome is only quite a minimal depth coating despite its impression.
Use *TINY* amounts of autosol.You may find that tiny amounts and gentle to firm rubbing willremove the rust. Do not scour the chrome.
When you've used the autosol/chrome cleaner to remove the specks of rust, rub WD40 along the chrome which will protect the chrome from further oxidisation and hence rusting and keep the chrome stable. Rub a small amount into the chrome work and polish to sheen.
It may also be worth buying "Scottoil" a spray - rust preventer which is a type of oil which protects against erosion. This can be sprayed on all metal work to protect the surfaces. This is specially developed for such use e.g on chassis, metal work, chrome etc.
Then, it is worth doing the same with vaseline, but being a little more liberal and allowing it to residues in the nooks and crannys and surfaces such as where the yokes meet other metal work at 90 degree angles, so that it acts as a barrier and insulant against any moisture and water and dust collecting in places where it is vulnerable to do so. This will waterproof the chrome in the majority of cases and barrier against the tarnishing effects of oxygen and the atmosphere. Its worth doing this every week.
So, for basic and cheapness AUTOSOL------> smearing and slight polishing with VASELINE leaving a slight film.
or for better protection AUTOSOL------>WD40---------->Scottoil---------> Smearing/slight polishing with vaseline to leave a slight film.
hope this helps
2007-05-03 12:27:45 · answer #3 · answered by RadicalReason 4 · 3⤊ 2⤋
To remove rust from chrome use a product that is specific for this like Chrome polish which removes rust also, here is a link to it:
http://www.corrosionconnection.com/page/pageid/521/Products
or here are some more
http://www.corrosionconnection.com/page/pageid/530
I hope these help!
Also don't just cover it with a tarp, moisture will get trapped inside and will cause mildew and more rust.
2007-05-06 15:09:51 · answer #4 · answered by CassieA 2 · 2⤊ 0⤋
Whatever you do DON'T use steel wool in any shape or form. You will regret it if you do 'cos it scratches the surface and makes things much worse.
There used to be a wire wool product on the market made of BRASS. Brass is softer than chrome so it won't scratch it at all. I used to work for a company that made it and I still have a heap of reject material. It is the best thing for the job.
After that you can use any patent chrome cleaner to finish the job.
2007-05-04 08:45:08 · answer #5 · answered by henwilv 3 · 1⤊ 1⤋
A product I have used called AutoSol is great for bringing up chrome and clearing the rust - get it from any autofactors or Halfords and the like.
However, to be honest, if your chromed parts are starting to rust, you might want to replace them with some good quality new parts, or get them proffesionally cleaned up then re-chromed.
2007-05-02 23:39:44 · answer #6 · answered by Neil 2 · 4⤊ 2⤋
S100 Finish Restorer to get rid of the rust, then S100 Corrosion Protectant to stop it coming back. Works a treat!
2007-05-03 01:35:08 · answer #7 · answered by Nightworks 7 · 0⤊ 2⤋
Before you go for the abrasive route, you might try WD40 and a paper towel. This gets off more than you might think. Then, add some liquid wax (my dad uses rain dance) with a paper towel. If it's on the exhaust, you'll need to clean the wax off...
2007-05-03 06:41:29 · answer #8 · answered by Anonymous · 3⤊ 2⤋
Eagle One Never Dull. It is the best stuff I have ever used, and it creates a protective finish as it cleans.
It comes already imbedded in a woolen padding material, so you won't damage the surface with any trash imbedded in your cloth.
2007-05-03 08:13:39 · answer #9 · answered by CafeTBird 4 · 0⤊ 2⤋
4/0 steel wool and Mothers metal polish.
I've had pretty good luck coating metal parts with Autoglass to slow down rust and oxidation. I live on the coast.
As for the scum, just shoot them and claim you were firing a warning shot that went low.
2007-05-03 05:26:53 · answer #10 · answered by Anonymous · 1⤊ 4⤋
Solvol Autosol for sure. trust me I used to be a mod with a lamberetta full of chrome.
2007-05-04 00:11:26 · answer #11 · answered by ? 4 · 1⤊ 2⤋