When the light stays I can hit the button to lock all the doors and all the doodrs lock but the drivers door lock will lock , then unlock all by it,s self .
There are times when the light doesnt come on and everything works perfectly, what gives?
2007-05-02 06:06:29 · 4 answers · asked by oneradartwo 2 in Cars & Transportation ➔ Car Makes ➔ Mercury
From another site with same problem---door switch is bad and needs to be replaced...go to....
http://www.alldata.com/techtips/2004/20040329c.html
It appears that on this model car, the switch is located inside the door on the lock mechanism...not too easy to get to.
Hope this helps, Paul
2007-05-02 07:02:43 · answer #1 · answered by paul h 7 · 0⤊ 0⤋
Check all the sensors and wiring for the security system. I had this issue on a 1998 Taurus, and it ended up being a bad connection in the drivers door to the security keypad.
2007-05-03 02:34:45 · answer #2 · answered by Zach 5 · 0⤊ 0⤋
Common fault on the Taurus - I've replaced several. Most likely culprit is the door ajar switch on the drivers side front door (the aforementioned little plastic peg).
2016-05-18 22:58:10 · answer #3 · answered by Anonymous · 0⤊ 0⤋
sounds like a bad door switch you can get a new one for about 6 or 8 bucks at you local parts store they are very easy to replace good luck
2007-05-02 07:50:12 · answer #4 · answered by Anonymous · 0⤊ 0⤋