English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I am repairing a Honda CB 500T. After finally getting it started, I noticed one exhaust gets extremely hot; the other not so hot. There is a small amount of backfiring as I rev it up. Any assist would be appreciated.

2007-04-30 15:15:42 · 5 answers · asked by James W 1 in Cars & Transportation Motorcycles

5 answers

2 likely causes.
#1: Carbs unbalanced. Could be dirty, with clogged jets, sticking float, or just not balanced to each other.
#2: Valves not closing properly. Could be bent valve stem, out of adjustment, or a piece of crap (carbon, etc.) not letting it close all the way.

The backfiring indicates carbs. Older bikes fire the spark plug on the exhaust stroke which will ignite any unburned gas that comes out. Check your plugs, see if it's starting to foul in that cylinder.

2007-04-30 16:22:06 · answer #1 · answered by Firecracker . 7 · 1 0

Some good answers so far.
Your bike has 2 sets or points. The points for the cylinder with the cold pipe, may need adjusting.

2007-05-01 15:02:23 · answer #2 · answered by guardrailjim 7 · 0 0

firecracker is on the beam with this 1.

2007-04-30 23:31:31 · answer #3 · answered by Anonymous · 0 0

one side is running leaner than the other the carbs will need to be propperly ballanced

2007-04-30 15:27:47 · answer #4 · answered by tonuprocker 4 · 1 0

check your spark plug ....on your cold cylinder....sound,s like it,s getting gas fowled.....better yet replace all the spark plug,s.

2007-04-30 15:30:37 · answer #5 · answered by slipstream 7 · 1 0

fedest.com, questions and answers