2007-04-30 09:48:30 · 6 answers · asked by thomas h 1 in Computers & Internet ➔ Hardware ➔ Monitors
Not by much, the best connection you'll be able to use is the HDMI connection, but you'll still be limited to the resolution of the TV.
2007-04-30 09:58:38 · answer #1 · answered by Master J 4 · 0⤊ 0⤋
indexed here are the rather some in all possibility themes you could properly be having. a million. the known of the television tuner card you're utilising isn't a great. 2. The utility that got here with the cardboard may well be "time shifting" by utilising default and the compression settings may well be generating the deteriorated exhibit. one thank you to tell that's once you alter the channel does the exhibit substitute in the present day or is there a a million to numerous 2nd put off in the previous you spot the channel substitute. 3. the point of the sign you're receiving on the computer is below anticipated. FCC spec states the minimum point going into the receiver (on your case, Tuner card) could desire to be 0dBmv. in case you have rather some splitters or defective/low priced splitters and connectors this may well be your challenge. regrettably, its annoying determining the point in case you do not have a sign point meter. so which you would be able to attempt to connect your television to a similar cable that became into going into the computer and notice how the known seems. If the known is solid then examine the specs for the minimum sign point for that card. or it somewhat is a low priced/undesirable card. if the television high quality is undesirable then you somewhat've undesirable levels or undesirable connections/splits. desire this permits
2016-12-16 19:38:12 · answer #2 · answered by ? 4 · 0⤊ 0⤋
How long is the cable? If you are using a cable longer than 6ft, or a VGA extension cable that is going to make your image look worse.
Use a high quality cable.
If you have a plasma / LCD / DLP TV, make sure that the resolution of the computer is set to the native resolution of the TV.
Use a DVI or HDMI connection if possible. Digital signals are more immune to noise and the cables should have been certified to be compliant.
2007-04-30 09:57:29 · answer #3 · answered by Simon T 6 · 0⤊ 0⤋
Use DVI to HDMI cable. Plug the DVI into your computer and HDMI into the TV. that (should) boost the quality
2007-04-30 11:39:11 · answer #4 · answered by hammerhead 2 · 0⤊ 0⤋
get a better video card
2007-04-30 09:52:46 · answer #5 · answered by bill 4 · 0⤊ 0⤋
try changing the resolusion
2007-04-30 09:57:21 · answer #6 · answered by Anonymous · 0⤊ 0⤋