At first, before dad put his hands on it, the machine would fill the machine but the coil in the middle would not junction/turn; after the cloths would just sit there, the machine would spin. Everything was normal except the coil. But after dad TRIED to fix it; it's all in parts....now NONE of the cycles work, NONE, no filling, no spinning, just a empty tank, lol. Can anyone tell me how to fix it, give me a website to fix it, or the blueprints to fix it; ANYTHING that will fix this. By the way, the washer is a Maytag Performa. Thanks!
2007-04-29 14:21:32 · 5 answers · asked by Answerz 4 in Home & Garden ➔ Maintenance & Repairs
Find your yellow pages and look for an applicance serviceman. Here is one case where a little knowledge is NOT a good thing.
Hire a professional.
2007-04-29 14:51:08 · answer #1 · answered by Bare B 6 · 1⤊ 0⤋
http://www.appliancepartspros.com/
they have info on how to change parts. Don;t know if it will be enough to help you oout unless you have some mechanical skills to start with. If you do then you may have a chance with the diagrams. God Luck
2007-04-29 22:39:47 · answer #2 · answered by pappy 5 · 0⤊ 0⤋
When you are left with a pile of parts it is time to start over. Buy a new mchine.
2007-04-29 21:55:32 · answer #3 · answered by ttpawpaw 7 · 0⤊ 0⤋
You can get a manual to repair it at your appliance parts store or at the library.
2007-04-29 22:27:11 · answer #4 · answered by mailittomenow 3 · 0⤊ 0⤋
If you can't afford a new machine, consider a good used one.
2007-04-29 22:36:37 · answer #5 · answered by Grendel's Father 6 · 0⤊ 0⤋