English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I'm on windows xp and don't to much about computers. Any help would be much appreciated

2007-04-29 05:31:47 · 12 answers · asked by bpooljay1982 1 in Computers & Internet Hardware Monitors

12 answers

if xp doesn't allow you to change it is because your graphics adaptor doesn't support deeper resolutions.

2007-04-29 05:35:51 · answer #1 · answered by Splishy 7 · 1 1

The chances are you need to install the drivers for your graphics card. These should be on a CD that came with either the graphics card, if it was bought separately, or on the motherboard driver CD if you have on-board graphics.

If you don't have the CD, you'll need to click on Start (bottom left of your screen, if you're using Windows XP) > Control Panel > System > Select the Hardware tab > Click on Device Manager > scroll down to Display Adapters. Here it will tell you what graphics card you have present.

If you have on-board graphics, you'll need to go to the manufacturer of your motherboard and download the drivers from there.

2007-04-29 05:42:08 · answer #2 · answered by micksmixxx 7 · 0 0

Assuming that you cannot change the slider position in display properties, (after right clicking on empty area of the desktop and clicking properties then settings): Go to start, control panel, system, hardware, device manager. Left click the plus sign next to display adapters. Right click on the adapter underneath it and left click on uninstall. Restart your computer. Allow reinstallation of hardware. Restart again. See if you can now change the display settings (steps given at beginning of my answer).

2007-04-29 05:37:16 · answer #3 · answered by christianprogrammer2 4 · 1 0

before you change your desktop resolution make sure you have the graphics card drivers installed and you are using the up to date drivers
then go to start>control panel>display properties>settings>then use the resolution bar to change the screen resolution,if your monitor is only a 15inch you can normally only go up to 1024x768,a 17inch monitor can go up to 1280x1024 and most others can normally reach their max resolutions
also you want to check your colour quality,16 or 32bit is the best quality,then also check your refresh rate,this is how fast the monitor displays your images ect,again this depends on your monitor size,however windows wont let you set your desktop to a refresh rate that it wont support
for example a 17" crt monitor has a max refresh rate of 85hz,and a 17" tft has a max refresh rate of 75hz,but check your monitors manual or website for refresh rates as setting it too high can damage the monitor and too low can strain your eyes
good luck mate

2007-04-29 07:41:00 · answer #4 · answered by brianthesnail123 7 · 1 0

Left click your mouse on the desktop, scroll down to properties... click on settings... there should be a slide bar for you to manipulate at this point... slide left for less resolution and right for more resolution.
Be gentle with the bar as you might lock your computer up if you rush the process.
Hope this helps!

2007-04-29 05:38:46 · answer #5 · answered by sirenyar 2 · 0 1

If none of the above works, it may be your video card is not up to the settings you are trying to achieve.

2007-04-29 05:42:15 · answer #6 · answered by Richard F 3 · 0 0

attempt 2 remember whilst problems started then fix ur computing device some days previous that date be sure U examine all the cautions b-4 U try this then test ur computing device & each thing U put in it from now on

2016-10-14 02:18:46 · answer #7 · answered by ? 4 · 0 0

when you are in display settings just move slider bar over to higher settings . this will decrease when u slide it right and increase when you move it left, example text size

2007-04-29 05:37:05 · answer #8 · answered by Anonymous · 0 1

You can't slide the 'slider', but have you tried clicking the scale at the highest end to move it?

2007-04-29 05:34:57 · answer #9 · answered by K © 3 · 0 0

richt click on your desktop, click properties

click the settings tab

change to the resolution you want.

2007-04-29 05:34:18 · answer #10 · answered by Anonymous · 1 1

fedest.com, questions and answers