When i turn sharp, like backing out of a parking spot or pulling in it kinda makes a grinding like noise, and shudders a little.. What could that be? It runs perfectly fine otherwise..
2007-04-29 04:12:32 · 5 answers · asked by Mason W 1 in Cars & Transportation ➔ Maintenance & Repairs
Take it out of 4WD.
2007-04-29 11:36:16 · answer #1 · answered by Nomadd 7 · 0⤊ 0⤋
whats up I have the very similar automobile. Mines a eco-friendly ninety 3 laredo. The noise is from the all-time 4 wheelchronic. once you change the back tire and the front tire look to no longer be in sync with one yet another. So the rear tire tries to capture up with the speed of the front tire. I went out sometime on a empty lot and stuck my head out the window even as making a pointy turn to exhibit screen the rear tire. it is going to easily attempt to snatch which makes the jeep experience likes it rocking to and fro. Its extremely emabarrasing parking in plenty in the front of human beings because the tires will sqeal even as pulling in. desire this enables!!
2016-11-23 14:44:11 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Sounds like it could be many different things. check to see if your tires are not rubbing anywhere under the fender first, if that is not the case check your brakes out. last but not least maybe have someone check the front wheel bearings. this last one could be expensive since they are sealed bearings in the hub. hope this helps.
2007-04-29 04:19:14 · answer #3 · answered by maggiemae 2 · 0⤊ 0⤋
sounds like a tie rod or control arm. take it to a shop and have it checked out. should be about $40 for an alignment, thats what you need.
2007-04-29 04:29:39 · answer #4 · answered by monotonous_life7 3 · 0⤊ 0⤋
One of the front wheel bearings and/or front axle u-joint.
2007-04-29 04:45:25 · answer #5 · answered by Anonymous · 0⤊ 0⤋