Drunk people asleep in them!
2007-04-29 01:53:38
·
answer #1
·
answered by Anonymous
·
1⤊
1⤋
Most common for mine- and I have a couple hundred feet--is the nails work out, so that water stands in some areas. Need to go around periodically and whack all the gutter nails back in.
Leaves are a prob if you have any trees overhanging your house--get plastic inserts to keep them out. Tried different ones, but the last ones I got at walmart worked the best and were cheap.
If you have a composition shingle roof you will also need to rinse out the gutters annually to flush out the gravel that comes off the shingles and lands in the gutters.
2007-04-29 03:57:27
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
First would be undersized depth for the amount of roof. This causes overflow when raining. If it is sections of gutter, as opposed to seamless, the joints can leak and cause dripping. If the gutters are not pitched properly, they will fill up faster and cause overflowing or backing up.
2007-04-29 01:56:14
·
answer #3
·
answered by sensible_man 7
·
0⤊
0⤋
rotting don't use galvanized under any circumstances, pull away they have new long screws & hangers to secure them as opposede th the old long nails ( if you have hardie plank with out a sub facia ( 2 x 6 - under facia ) I would give it very close scroutany! over hanging trees... no mater what size they will clogg, the gutter helment works, but throus all the trash & some water onto the area below ( ie - patio ). plus other stuff already mentioned!
2007-04-29 02:40:20
·
answer #4
·
answered by Bonno 6
·
0⤊
0⤋
Incorrect fitment - fitted straight instead of at slight incline towards drain pipe or fitted with incline facing AWAY from drain pipe
Faulty Joint Seals
Full of debris - trees leaves - dirt etc
Other than that - not much else can go wrong with them
2007-04-29 01:55:54
·
answer #5
·
answered by jamand 7
·
0⤊
0⤋
leaks
2007-04-29 01:53:31
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋