A question for scrapbookers. What is an easy way to adhere lettering,cut from card stock,onto your scrapbook ?

Answer 1

As a new user of Craft Robo I may have got this wrong - but thought I would offer it anyway! You could try cutting your design IN REVERSE - then before you remove it from the cutting sheet you can affix whatever adhesive medium you intend to use in the scrapbook to the back of the design and press straight onto the page. Probably require careful positioning technique - but you could practice a bit first. Hope it works. Regards yiayia

Answer 2

Another way but not the best is to add stickers to the outside of the letter. But then it will still flip up. Be sure to put some type of adhesive on the back. Get rid of extra goop that comes over the sides. But the best way is probably the Xyron way.

Answer 3

Run the sheet through your Xyron machine with the adhesive on one side. Cut out your letters and apply.If you don't own a Xyron machine, you can get one at any large craft store. Many offer 40% off coupons each week.

Answer 4

I dont have a xyron machine and i just use a strong adhesive like glossy accents, i make a lot of mini albums which are handled a lot and it works fine.

Answer 5

I use the creative memories tape runner for all of my pasting. I havnet got a xyron machine, nor have I ever tried one. Good Luck

Answer 6

I was also going to suggest a xyron machine. You can also use a glue stick if you have enough room on them to use it without it getting messy.

Good Luck!

Answer 7

For anything small, I use Creative Memories Precision Point adhesive. It has a roller tip on it so it's kind of like using a pen with glue inside instead of ink.

Here is the website:
http://www.mycmsite.com/sites/katieveliz/catalog-index?event=productdetails&eventId=772&productGroupId=&categoryId=136&categoryIdParm=%7C134%7C136%7C&pageTitle=Precision+Point@@8482%3B+Adhesive&relatedItem=N&qtyOrdered=&productId=&itemSku=&act=

I hope this helps!

Answer 8

if you are putting it on the cover of your book, try the xyron or modge podge
for inside, xyron will work but i like the zig 2 way pen

Answer 9

I like to use diamond glaze - by ranger. Its great for the embossing but also a fabulous general purpose glue for glueing on cardstock. It will glue anything to anything!

Answer 10

I use my xyron sticker maker.