i have a 94 dr250 4 stroke, how can i get more power, it seems to lag for a long time when it first starts, i pull the choke and start the bike and it takes forever to warm up, if i let it idle for like 10 min then hit my throttle, it bogs, but after i ride it for a while it's fine. i just need some advice/tips on what i can do to get some more power, and faster warm up.
2007-04-27 00:19:52 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
get the valves adjusted,fit an after market exhaust pipe with the correct jetting and give the bike a good tune up..
2007-04-27 00:26:36 · answer #1 · answered by greg e 4 · 1⤊ 0⤋
Once it starts, rev it up and down for about 15-30 sec. Then start riding with the choke on. Turn off the choke when it will run without it. All bikes take a minute or two to warm up.
2007-04-27 02:29:01 · answer #2 · answered by guardrailjim 7 · 1⤊ 1⤋
The 250 4Ts compete with 2T 125s. The 2Ts 250s compete with 450 4Ts. So as a fact, the 250cc 2-strokes are faster.
2016-05-20 03:43:37 · answer #3 · answered by ? 3 · 0⤊ 0⤋
Its in need of the valves reset and a carby tune ~~
2007-04-27 00:28:07 · answer #4 · answered by burning brightly 7 · 0⤊ 0⤋
get your carb re-jetted, that should fix the problem, sounds like you're not getting a proper fuel-air mixture, could be as simple as your lead screw.
2007-04-27 00:22:59 · answer #5 · answered by Anonymous · 0⤊ 0⤋