What's the best way, and what's the cost? The back trunk rattles when the bass set is turned up.
2007-04-26 07:45:13 · 6 answers · asked by Ryder 1 in Cars & Transportation ➔ Maintenance & Repairs
Place Dynamat all over inside of the trunk panels. It costs about $130 for the whole kit. You can also usually adjust the trunk latch a bit (by loosening a couple of bolts and moving it down a tad) to make it seal tighter so it doesn't rattle quite as much. Hope this helps.
2007-04-26 07:51:13 · answer #1 · answered by lastnightinmyhead 4 · 2⤊ 0⤋
Point a shotgun at your stereo unit and pull the trigger!
If your trunk is rattling, it's too damned loud. Don't be such an inconsiderate git.
2007-04-26 11:45:02 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Silicone glue the spaces between the braces and the outer panels.Adjust the latches and udercoat or dynamat the inner panels
2007-04-26 07:58:30 · answer #3 · answered by Edward G 2 · 0⤊ 0⤋
there are a number of products that are available at your audio store, but this is an example so you can understand what you want
2007-04-26 07:55:39 · answer #4 · answered by Durai 3 · 0⤊ 0⤋
turn the volume down! the rest of us don't want to listen to your steroe while you're driving by anyway
2007-04-26 09:29:26 · answer #5 · answered by hunting4junk 4 · 1⤊ 0⤋
Buy a quality car.
2007-04-26 07:53:25 · answer #6 · answered by Sane 6 · 0⤊ 1⤋