2007-04-24 12:31:08 · 7 answers · asked by theraunchyisbak04 2 in Cars & Transportation ➔ Car Makes ➔ Chrysler
The crank sensor is on the transmission bell housing. The pickup in the distributor is the cam sensor.
2007-04-28 12:12:35 · answer #1 · answered by Anonymous · 0⤊ 0⤋
The cam sensor is in the distributor. The crank sensor is on the bell housung
2015-10-30 08:05:59 · answer #2 · answered by ? 1 · 0⤊ 0⤋
The 'Crank Sensor' is located on the outside of the block at the bottom pulley at the end of the Crank Shaft .It is attached to the block with a wire harness connected to it.The 'Pulley' is mounted on the 'Harmonic Balancer' at the very end of the Crank Shaft.You can get a Chilton or Haynes Auto Repair Manual at any Auto Parts Store for future reference.
2007-04-24 21:43:59 · answer #3 · answered by tturbod2001 4 · 0⤊ 1⤋
These vans don't have crank sensors, with the 3.0L, as it has a distributor on it. There should be a sensor under that cap there though.
2007-04-25 08:01:45 · answer #4 · answered by Silverstang 7 · 0⤊ 0⤋
It doesn't have a crank sensor. It uses the distributor. Which very, very seldom ever gives a problem.
2007-04-26 02:26:25 · answer #5 · answered by Jackolantern 7 · 0⤊ 0⤋
get a manual or contact chrysler
2007-04-24 20:41:04 · answer #6 · answered by smokey 7 · 0⤊ 0⤋
probibly close to the crankshaft
2007-04-26 16:12:49 · answer #7 · answered by Ben Houin 1 · 0⤊ 0⤋