On DirecTV, my screen is black and the message said" Searching for satellite signal", what should I do?

Answer 1

Your receiver is not getting signal from the dish. If was working before, and this just happened, either a cable came loose (or was damaged by rodents) or the dish is no longer pointed correctly. Sometimes a strong windstorm will move the dish. Unless you have done it before, pointing the dish can be tricky and you should have a qualified installer do it.

Answer 2

As long as you have not disconnected the coaxial cable for the back of the DirecTV receiver/DVR then check to make sure the sattelite dish has not moved or blocked by trees. If neither of these are the situation then check with Dish's Tech support, they may need to resend the signal to your box.

Answer 3

Barry ok's advice is a possibly reason for the issue, whether it could additionally be a bad cable connection. confirm each and every of the cables and connectors are in sturdy concern. ultimately, you may have a defective LNB, change, or receiver. i choose to advise switching the LNB outputs and notice if the issue strikes to the different satellite tv for pc (satellite tv for pc a million); if so, the issue is interior the LNB; whether it continues to be on 2, it is possibly to be your receiver. you additionally can try switching cables partly of the cable run.

Answer 4

Also check to make sure that the "satellite in" connection is tight. It could also be that your dish was disturbed. The technical support folks will walk you through a check-up before they send someone to your house. In my case, two LNBs had fallen off the dish.

Answer 5

call technical support. If it is raining that could be why you are having trouble with your signal. It always happens to us. Have you paid you bill lately? : )

Answer 6

unplug it wait two minutes then plug it back in,wait two minutes then try it.