Something was making noise in my VW Jetta 2000, after I searched I found the steel tub going to the booster from engine was loose, I just hold it tight the noise stopped, and my question is what is that pipe and can I just glue it? Or have to take it to mechanic.
2007-04-16 06:06:03 · 3 answers · asked by RRRR 1 in Cars & Transportation ➔ Maintenance & Repairs
That's the vacuum line. Glue probably wouldn't hold. It's hard to tell without knowing where it's broken, but if you can get tape around the bad spot, you can get some antenna connector sealing tape from Radio shack that should do the trick. Not electrical tape, but a special type that seals to itself. Otherwise, get some 5 minute epoxy and try to seal it with that.
2007-04-16 10:26:39 · answer #1 · answered by Nomadd 7 · 0⤊ 0⤋
if its got a grummet,just change the grummet.if its welded on the booster,take some jb weld and put around it and let it set up.
2007-04-16 09:05:27 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Vacuum line take to shop or replace yourself.
2007-04-16 06:14:20 · answer #3 · answered by James B 5 · 0⤊ 0⤋