It's connected to the electical mains of the house and i've got one on each floor so that equals three alarms. The alarm on the 1st floor beeps every 30 seconds, it's been like this for a few days and it's bugging me. What do I NEED TO DO?
2007-04-14 21:38:42 · 8 answers · asked by sexylove 2 in Home & Garden ➔ Maintenance & Repairs
Most fire alarms, even those tied into the electrical system, have batteries as back-up in case of a power outage. When the battery is dead, the alarm will beep to let you know to change the battery.
2007-04-14 21:41:11 · answer #1 · answered by FCabanski 5 · 0⤊ 0⤋
I think you've already got the answer. It's the battery back up, time to change the battery. If the power fails then you still have the alarm working. Good luck
2007-04-14 21:47:41 · answer #2 · answered by Fordman 7 · 0⤊ 0⤋
Change the battery. It is an alarm to let you know the battery needs changed.
2007-04-14 21:46:25 · answer #3 · answered by Anonymous · 0⤊ 0⤋
You need a new battery. I dont' know why since it's connected to the electricity but mine was doing that too so I took the battery out it shut up! If you put in a new battery it won't do it anymore.
2007-04-14 21:40:32 · answer #4 · answered by duuh 4 · 0⤊ 0⤋
It might be battery powered. If not, buy a new smoke alarm.
2007-04-14 21:40:48 · answer #5 · answered by jmp478 3 · 0⤊ 0⤋
buy a new 1ns
or mabye change the batries
or if theres a red button in the middle press it
best 1 is to buy new 1ns there not to expensive!!!
2007-04-14 21:42:58 · answer #6 · answered by glossie123 1 · 0⤊ 0⤋
change the back up battery inside its nearly flat
2007-04-14 21:41:16 · answer #7 · answered by Anonymous · 0⤊ 0⤋
Check that you have not blown a fuse, check battery condition, check and reset system.
2007-04-14 21:52:13 · answer #8 · answered by morekho 1 · 0⤊ 0⤋