What is power Play in limitted over cricket?

Answer 1

A Powerplay is a rule introduced in 2006 concerning fielding restrictions in One-Day International (ODI) cricket. In the past, there was a 15-over period at the start of an innings when only two fielders were allowed outside the 30-yard circle. This meant that attacking batsmen were likely to score runs quickly in the first 15 overs, but would become more watchful after the end of the spell.

In an effort to keep the game more exciting during the middle overs, this rule was amended to apply not only to the first 10 overs of every innings, but also in two blocks of five overs, Powerplays, which will be used at the discretion of the fielding captain.

Implementation of Power Play is as follows:

1) The first block of 10 overs of an innings is known as Powerplay One. The fielding restrictions during this period are exactly the same as per the old ODI rules with only two players being allowed to stand outside the 30-yard circle and two fielders required to be placed in close catching position.

2)The first block of five overs chosen at the fielding captain's discretion is known as Powerplay Two. The fielding captain has to decide at which point he wishes to implement this rule. He can only implement it at the beginning of an over, provided he informs the umpire.[1] Again, only two fielders are allowed outside the 30-yard circle. However there is no mandatory number of close catchers under this power play.

3)The second block of five overs, with identical parameters to Powerplay Two, is known as Powerplay Three.

4)When the fielding side's captain informs the umpire that he wishes to enact a powerplay, the official will signal as such by moving his arm in a circular motion.

5)Should the fielding captain choose not to exercise his discretion, the remaining powerplays will automatically commence at the latest available point in the innings (i.e. at the start of the 41st and the 46th overs in an uninterrupted innings). Power play at the final overs would mean that the batting side has greater opportunity to score runs as only two men would be out of the thirty yard circle.

The Powerplay was intended to add to the excitement in ODI cricket. If the batting team has got off to a very quick start, the fielding captain is likely to choose to delay Powerplay 2 and 3, and instead spread out the field to stem the flow of runs. Powerplays may then be taken when an attacking batsman is out, or when the run rate has been reduced. Otherwise, all 20 Powerplay overs are likely to be taken at the start of the batting team's innings.

The rule was first encountered in the One-Day International between England and Australia on 7 July 2005 and was then finalized after a trial period in 2006. The rule is included as part of the playing conditions for the 2007 Cricket World Cup.

Answer 2

*The first block of 10 overs of an innings is known as Powerplay One. The fielding restrictions during this period are exactly the same as per the old ODI rules with only two players being allowed to stand outside the 30-yard circle and two fielders required to be placed in close catching position.

*The first block of five overs chosen at the fielding captain's discretion is known as Powerplay Two. The fielding captain has to decide at which point he wishes to implement this rule. He can only implement it at the beginning of an over, provided he informs the umpire.[1] Again, only two fielders are allowed outside the 30-yard circle. However there is no mandatory number of close catchers under this power play.

*The second block of five overs, with identical parameters to Powerplay Two, is known as Powerplay Three.

*When the fielding side's captain informs the umpire that he wishes to enact a powerplay, the official will signal as such by moving his arm in a circular motion.

*Should the fielding captain choose not to exercise his discretion, the remaining powerplays will automatically commence at the latest available point in the innings (i.e. at the start of the 41st and the 46th overs in an uninterrupted innings). Power play at the final overs would mean that the batting side has greater opportunity to score runs as only two men would be out of the thirty yard circle.

*The Powerplay was intended to add to the excitement in ODI cricket. If the batting team has got off to a very quick start, the fielding captain is likely to choose to delay Powerplay 2 and 3, and instead spread out the field to stem the flow of runs. Powerplays may then be taken when an attacking batsman is out, or when the run rate has been reduced. Otherwise, all 20 Powerplay overs are likely to be taken at the start of the batting team's innings.

Answer 3

From what I understand, ODI games had fielding restrictions in the first 15 overs. but now it has become more flexible, where instead of the first 15 overs, field restrictions are extended for 20 overs & applied in the name of "powerplays", where the 20 overs are classified as 3 powerplays of 10 overs, 5 overs & 5 overs each.

The 1st powerplay of 10 overs is compulsorily applied to the first 10 overs of the innings. The other two powerplays can be applied any time during the innings, according to what the bowling side chooses.

For example:
1st Powerplay: 1st - 10th overs
2nd Powerplay: 16th - 20th overs
3rd Powerplay: 32nd - 36th overs

Answer 4

There are three vigour performs, the only is on the begin of the innings, this vigour play is for 15 overs, there's a 30 backyard radius line drawn no more than 2 fielders can also be external that circle for the duration of this play. This is completed to make the sport extra enjoyable, the batsmen are stimulated to hit the ball within the the air. the moment vigour play is selected the by means of the fielding workforce, they are able to come to a decision once they desire to make use of that, it si of five overs, once more most effective two fielders external the circle. The 3rd vigour play in recent years is to ve made up our minds by means of the batting workforce once they desire to have that, once more of five hours however for the duration of this three fielders can area external the hoop.

Answer 5

A powerplay is a name for the fielding restrictions in limited-overs and Twenty20 cricket.

One day Cricket rules

There are three types of fielding restrictions:

First Power Play or Mandatory Power play:

First 10 overs of an innings are mandatory Power play , where the fielding side should have maximum two fielders outside the 30 yard circle....... for continuation read the above link

http://questioncricket.com/skills/fielding-restrictions-and-powerplays/