how can i waterproof a bathroom wall so i can use a shower,but not ceramic tiling?

Answer 1

get 2 telescopic rails and two shower curtains so that you have one each side of the tub

Answer 2

several ways one is to buy a shower surround to close the areain and then add a hose type shower and faucet togeather on the faucet then use plant hooks in the ceiling for the shower rods to hang from and then place the shower curtain in the tub or use cut pieces of marlite sheeting comes in 5 by 8 or ten sheets for this type of work cut the sides then glue and screw the edges to the wall and then place the back side in with the construction adhesive the wall boards should only need a feww panel nails on the edges and then caulk the inside base and corners with a good caulk this covers most of the fasteners place a expanding shower rod that screws out bigger and add the rings and curtain ask foradvice at the home depot from the plumbing guys and thcarpenters there OK

Answer 3

You can buy 8X4 (UK feet) water resistant sheets in thousands of different designs. Some look like tiles but the choice is amazing.

Answer 4

Plastic tub surronds like the answer. Might not hurt to replace the drywall with concrete backer board first. Good luck

Answer 5

there are 3 or 5 piece tub surrounds available at home improvement stores everywhere, easy to install.

Answer 6

HI THERE,
STEVGWEE HERE,
TO FIX YOUR SHOWER, HOME-DEPO HAS A WHAT YOU CALL A PLASTIC WALL THAT YOU CAN GLUE TO YOUR WALL. SOMETIMES THEY HAVE 2 OR 3 SIDES TO IT. AND WHAT YOU WANT . BEST WAY IS TO GO THERE AND FINE WHAT YOU WANT. IT IS VERY EASY TO PUT IT ON.
stevgwee@ sbcglobal.net

Answer 7

hmmm. you might try a circular shower curtain.