2007-04-13 00:53:53 · 10 answers · asked by Anonymous in Education & Reference ➔ Trivia
When Teflon is applied to the utensil,it is wet and adhesive.It then goes through a drying kiln.
Sort of like water based paint.You can thin it down wath water and paint the walls or whatever.Once dry and hardened you can clean these finished walls with water.
2007-04-13 01:13:02 · answer #1 · answered by Anonymous · 2⤊ 0⤋
The sticking process is usually done under a high heat formula in a very high speed centrifuge. At least I'm pretty sure that's how it must be done, except the cheaper versions of non-stick pans which are dipped in a Teflon fluid solution before being dried with a hair dryer.
Please note that Teflon is spelt with a capital T - it's a trade name.
2007-04-13 07:57:31 · answer #2 · answered by Anonymous · 0⤊ 0⤋
They have a high powered sprayer that they use to spray it onto a pan while the teflon is still wet, there for it sticks, then they dry it on it by baking at a very high temp.
2007-04-13 07:24:09 · answer #3 · answered by Pen 5 · 0⤊ 0⤋
They apply the teflon with the non-stick side up. The other side is very sticky.
2007-04-13 04:40:37 · answer #4 · answered by horsinround2do 6 · 0⤊ 0⤋
I'm guessing that only one side of it must be teflon and the other side must be made of some sort of abrasive material which is stickable!???
2007-04-13 00:59:25 · answer #5 · answered by JustJem 6 · 0⤊ 0⤋
Chemically
2007-04-13 00:57:45 · answer #6 · answered by Caretaker 7 · 0⤊ 0⤋
One of lifes enternal questions, much like;
sponges grow in the ocean - how much deeper would it be if that didn't happen.
2007-04-13 02:59:47 · answer #7 · answered by meep meep!! 3 · 0⤊ 0⤋
THEY SPRAY THE COATING ON TO THE PAN.
2007-04-13 01:02:30 · answer #8 · answered by aunty m 4 · 0⤊ 0⤋
lol good question,i will watch for answers
2007-04-13 00:58:04 · answer #9 · answered by tuppenybitz 7 · 0⤊ 0⤋
Ha ha ha ha ha ! Good question!
2007-04-13 00:58:56 · answer #10 · answered by Ladybug II 6 · 0⤊ 0⤋