anyone know what will get hard stuck on black stuff of of an iron?

Answer 1

If the substance stuck on the bottom of the iron is waxy, you should turn the iron onto its highest setting and run it across newspaper until the residue disappears.


If the substance is oily, then just wet a rag with ammonia. Next, just rinse the iron off with some water and the gunk should be gone.


Vinegar works as a cleaning agent for many irons. Pour some on a clean cloth, and wipe the surface of an iron throughly. If that doesn't work, combine vinegar with baking soda. With a soft cloth, scrub the surface of the iron.


You can get rid of any build-up in the vents of the iron by taking a cotton swab or a pipe cleaner and gently sweeping the residue out of the area. If you attempt to use something of a harsher nature, like a tool or a knife, you could scratch the base of the iron, causing future problems.


To clean the reservoir of your iron, pour a solution that is one part vinegar to one part water in. Turn the iron on. Allow it to steam for about four minutes. Drain the iron for an hour, and be sure to repeat the process with clean water before you iron any clothing items.
One of the best ways to learn how to clean an iron is to prevent build-up problems in the first place. Read your manufacturer's instruction manual carefully. It should contain a number of tips to not only prevent the steam vents from clogging, but also to prevent materials from building up on the base of your iron. Maintaining a clean iron can make the process of ironing clothes move quicker and smoother.

Answer 2

Let it get cold, then scrape best you can with a small, sharp knife to make some inway into the burnt on stuff. Then get a kitchen wire panscrubber or brillo pad, a little water and perhaps kitchen cleaner, scrub away at it this way and that. Have another go with the knife and perhaps the scrubby side of a washing-up sponge.

This should get most of it off although very cross-making by the end of it. Wipe over with a clean, damp cloth and have another go at the rest another day.

I believe there is also a special stick of something one can buy to rub the iron base with when heated up then turned off. Try an old-fashioned ironmongers if you know of one.

Answer 3

I've been there. The iron is collecting black stuff because the surface has been scratched, or You've been ironing dirty clothes. Buy a new iron.

Answer 4

Erectile Dysfunction can be devastating to men, and unfortunately, millions of men suffer from the condition. Learn how to cure erectile dysfunction https://tr.im/Ns6vU

If you go to the doctor to talk about the issue, you’re likely to get put on one or more of the popular medications used to treat the condition. While they can be effective (temporarily), these medications come with a raft of side effects, some of which are decidedly unpleasant. Even worse, these medications aren’t really a cure, they’re more like a temporary workaround.

Worst of all, they tend to be really expensive. Month after month, you’re having to pay to work around your condition. That’s what the Big Pharmaceutical companies want.

Answer 5

with a candle rub the iron plate , then turn your iron on to a high setting , Now un the iron over an old rag , this should lift it out

Answer 6

The usual method is soap on a hot iron and keep ironing it out on a damp cloth. Failing this, a Brillo pad !

Answer 7

Bar soap will do the trick.... hot iron and rub the soap on it. Iron on a washcloth. If all else fails then get the sos pads out

Answer 8

1

Answer 9

wait until iron is cool and scrape off with a knife, then rub it over with a soft scouring pad then a damp cloth

Answer 10

We use steel wool to get it off. As long as the iron is not teflon coated on the bottom, if it is then you can't use the abrasive steel wool.