English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Hello, I just parchused a 1995 750 Honda Magna And removed the gas tank & fenders to paint them , now i assembled all together, there`s gas going into carb, but the deam thing won`t start . Any Ideas?

2007-04-07 11:18:23 · 2 answers · asked by ismaelfranqui 1 in Cars & Transportation Motorcycles

2 answers

You may have the fuel lines crossed.

2007-04-07 11:30:30 · answer #1 · answered by gdwrnch40 6 · 0 1

Is the kill switch in the "run" position? (common mistake).
Check for spark. Insert a known working spark plug into a spark plug cap. Lay the threads of the plug against the engine and try to start. Check each plug and check for spark at each cap.
The carbs probably have to be cleaned. If you've never done it before, good luck getting the carbs off and back on again LOL (it's not an easy job on this model).
Purchase a shop manual before they go out of print.
http://www.motocom.com/motorcycles/

2007-04-07 11:38:04 · answer #2 · answered by guardrailjim 7 · 0 0

fedest.com, questions and answers