I was working on getting my Suzi running, and finally did. Then I turned the ignition off. When I turned it on again the indicator lights wouldn't go on and I couldn't get the bike started again. The tail/brake light still works. Any ideas as to what might be going on?
2007-04-06 17:13:16 · 5 answers · asked by freeheart 1 in Cars & Transportation ➔ Motorcycles
Seems like the ignition switch might be bad. Here's a wiring diagram -
http://www.smokeriders.com/diagrams/
2007-04-06 17:40:28 · answer #1 · answered by guardrailjim 7 · 0⤊ 0⤋
i replaced into going to assert the regulator, yet "gdwrnch40" beat me to it LOL --positioned a volt meter on the battery and rev the motorcycle. Over 7.5 volts and the regulator will be undesirable. --be sure the battery is making a fantastic connection to floor. --motorcycles with 6 volt batteries oftentimes run on a balanced gadget. If the battery is bumped off, the extra voltage of the charging gadget could be directed to the headlight and burn it out. A lifeless battery (or one which isn't take a charge) - similar element. --If the battery replaced into susceptible, or no longer making a fantastic floor, the flasher relay gained't artwork suited.
2016-11-27 00:24:11 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Check all of your fuses and wiring connections.. Wow, 32 years old and you got it running .. that was an accomplishment in itself.
2007-04-06 19:30:37 · answer #3 · answered by the_buccaru 5 · 0⤊ 0⤋
it might have something to do with the wiring of the bike
2007-04-06 17:17:28 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Because it's not a HARLEY?
2007-04-06 17:20:45 · answer #5 · answered by I feel better 5 · 0⤊ 2⤋