I want to install 2 harddisk. How can I do this?

Answer 1

Set one as "master" and the second as "slave", then just connect them to the first hard drive controller cable.

Answer 2

Just open the cover of the system and see what type of processer are you using and then accordin you the buy the hdd which suits the best adn then you take the Hdda nd connect the hdd in th system as it was connected in the first one anly things you have to see theat the hdd ahs a jumper are there so just chnage the jumper to secondry master or secontry slave and insert the hdd and conect the cables and restart the system after reeboting the system i,if you are using winxp right click on my comp and go to managere there you can seet the hdd and fight click and then make it as basic disk and make the two partions ans format the hdd with ntfsa nd restart the system and start using the system.

Answer 3

I suppose you mean Two External Hard Disk if so:
Before you purchase take Computer Model No and Name of maker with you and ask the seller if you can use the Hard disk of your choice in your computer.

Then I am sure you will find CD with hard disk follow instructions in the CD and install. In this case you will have usb cable to connect with PC and AC adapt or to connect with electric.

Install first hard disk by inserting in the CD drive after completion do Second one. Point of advise be careful when turn off, you can find information about that in the manual or PDF manual in the CD.

I hope this may help you.

[e-mail]

Answer 4

its best to get this done at a store or techinician since one wrong move can damage ur whole computer!!! also, if its an internal harddisk, u should do it at the technician, but if its external, u just hav to plug it in and it works!

Answer 5

one master/ one slave
done with jumpers on the back