I want to know whats the best way to do donuts in a g35 coupe stick shift.
2007-04-05 11:45:18 · 7 answers · asked by Mike J 1 in Cars & Transportation ➔ Car Makes ➔ Vauxhall Opel
A posi unit and a little excessive horsepower are very helpful. Try it in a wet parking lot first, it will be easier to break the tires loose.
2007-04-05 12:28:06 · answer #1 · answered by Nc Jay 5 · 0⤊ 0⤋
Put it in first, let off the brakes, cut the wheel 45 degrees or so, pop the clutch pretty quick as you simulatenously push the gas down. It'll take a little practice to pull it off correctly, and its not particularly good for the car. Also make sure you turn off traction control if equiped.
2007-04-05 11:54:02 · answer #2 · answered by y2bmj 4 · 0⤊ 0⤋
If your car has a traction control feature, and you can't override it, then you don't need to try and do any donuts. But, If you don't than just rev the motor up just a little and
"pop" the clutch!!!
2007-04-05 11:59:12 · answer #3 · answered by Don S 1 · 0⤊ 0⤋
What's a g35? 2nd gear works the best for me gas it and turn the wheel!! be careful--Tear it up!
2007-04-05 11:51:03 · answer #4 · answered by selectiveimage 2 · 0⤊ 0⤋
Your differential needs to be "posi"
Otherwise, you'll just spin the inner tire and drive in circles.
2007-04-05 11:55:16 · answer #5 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋
I'll take it that it's your Daddy's car? I hope he doesn't see this or you'll be asking how to do 360's on a bus.
Good luck.
2007-04-05 11:49:59 · answer #6 · answered by Fordman 7 · 1⤊ 0⤋
It doesn't matter what I say you're going to fry your clutch either way.
2007-04-05 12:17:52 · answer #7 · answered by Adrien B 1 · 0⤊ 0⤋