I printed on one side of the paper
now how do I print on the back of it?
2007-04-04 12:59:30 · 6 answers · asked by Lonnie 1 in Computers & Internet ➔ Hardware ➔ Printers
Look in the page settings for your printer and see if it has print odd and print even pages. Print the odd pages. Depending on how your out basket is arranged you may have to now reverse the pages and place them in upside down. Now print the even pages. Try it with just a few pages first.
Make sure that you do not have cheap light paper or the print will show through. You may need a heavier paper.
2007-04-04 13:16:40 · answer #1 · answered by Barkley Hound 7 · 0⤊ 0⤋
I have found out through trial and error that you put the page just printed face up with the top of the page facing the into the printer. If this does not work then try putting the top of the page facing down out of the printer. However, you always want the printed side facing up!
You should also be able to find the answer in your user manual. Good Luck!
2007-04-04 21:03:30 · answer #2 · answered by chandlersanniebee 1 · 0⤊ 0⤋
You buy an expensive printer with an in and out feeder or you take the page, put it back in the feed tray, but upside down to the original (i.e. usually face down) and print the next page. Some printer programs will allow you to stop at the end of each page so you can feed in a new page or refeed, otherwise you have to print one page at a time from the source program
2007-04-04 20:04:08 · answer #3 · answered by Mike1942f 7 · 0⤊ 0⤋
just put it back in the paper slot and print the stuff you want on that side
2007-04-04 20:04:01 · answer #4 · answered by russ s 3 · 0⤊ 0⤋
you turn the paper around and put it back in and then push print
2007-04-04 20:02:28 · answer #5 · answered by Anonymous · 0⤊ 0⤋
turn the paper upside down and flip to blank page facing you and stick it back in the paper tray
2007-04-04 20:04:03 · answer #6 · answered by lilcbcgurl 1 · 0⤊ 0⤋