2007-04-02 15:27:16 · 6 answers · asked by blackknight5451 1 in Cars & Transportation ➔ Maintenance & Repairs
yes, it's possible. I've done detailing using them but remember to use slightly more thinning, strain the paint 1st & get ready solvents to clean the gun & especially the needle & ports to prevent clogging. Finally, practise, practise, practise... Use a clean scrap car part to simulate the actual job, I'm using a scrapped car hood which I've cleaned to practise on.
WARNING : the airbrush spray which has been thinned with more solvents are MORE FLAMMABLE!!!
Have fun & good luck!
2007-04-02 15:43:57 · answer #1 · answered by macroeye 1 · 0⤊ 0⤋
yes i checked out some of the motorcycle custom airbrush helmets and bikes and thats what they use high end automotive paints and clear coats check out the work on badasspaints.com.
2007-04-02 15:37:01 · answer #2 · answered by jamie 1 · 0⤊ 0⤋
Sure, they use them at the truck plant if we have to touch up the paint on a truck that picked up a scratch somewhere. Then we bake them again, and send them on down the line.
2007-04-02 15:32:51 · answer #3 · answered by Fordman 7 · 0⤊ 0⤋
Definitely, as long as it is thinned properly and the paint "cup" or any internal parts are not made out of plastic.
2007-04-02 15:31:35 · answer #4 · answered by know da stuff 4 · 0⤊ 0⤋
Yes, but I think you have to make it pretty thin. A good auto paint supply shop can answer it better.
2007-04-02 15:31:09 · answer #5 · answered by Systematics 3 · 0⤊ 0⤋
You could just change to a bigger nozzle and thin it down.
2007-04-02 15:31:11 · answer #6 · answered by Big C 6 · 0⤊ 0⤋