i am not very good in this, but i'd imagine make four lines of wood - put them all together on the floor. Screw them together then put a board measured same type (do all the details of the measurements) and screw them four sides of the wood. then you can colour the bored and it won't show that it is around the wooden made thing.
i'm not sure, but seen some builders make this.
why don't you go:
http://www.ehow.com/how_10151_build-simple-reinforced.html
2007-03-29 08:18:52
·
answer #1
·
answered by Spark S 5
·
1⤊
0⤋
There are basically two ways.
1. You can find fake bricks, which are only the face of bricks, and cement them to a board - I have done that in my house and it looked good.
2. I have also seen people take plywood and rout out a brick design and paint that. That will require someone who knows something about wood work. You can use 1x4 boards and a dado blade on the saw and do it that way also, then staggering the boards so that it looks like a brick wall. Anyone with a 100 buck table saw can do that.
2007-03-29 09:55:13
·
answer #2
·
answered by Polyhistor 7
·
0⤊
0⤋
check at Lowe's or Home Depot---there used to be a pressed wood sheet that was fake brick. I used a white with a grey mortar in my kitchen years ago.
2007-03-29 08:16:43
·
answer #3
·
answered by lilabner 6
·
0⤊
0⤋
Use fake bricks
2007-03-29 08:15:41
·
answer #4
·
answered by You may be right 7
·
0⤊
0⤋
They sell foe brick walls and other styles its like paneling ,or paint brick walls on plywood good luck
2007-03-29 08:18:33
·
answer #5
·
answered by chris c 2
·
0⤊
0⤋
If you have to find nice ideas for woodworking i can suggest you to check here http://woodworking.toptips.org
It's perfect if you are just starting out or if you're a seasoned carpenter. you will like it for sure !
It has almost 20.000 woodworking plans and you have a CAD/DWG software to view and edit the plans. You have step-by-step instructions with photos and high quality blueprints and schematics. If you are a beginner this is the easiest way to start your woodworking projects, and if you already have experience you can anyway find a lot of interesting ideas!
2014-09-26 05:20:38
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
Masonite corp. makes a panel that looks like red bricks. It can be nailed or glued to a wood frame. It is available at home centers.
2007-04-02 01:12:17
·
answer #7
·
answered by Leo L 7
·
0⤊
0⤋
Use red paper, the big rolls, and paint or draw deep black lines on it the size of bricks. Hang it over boxes or etc. Also you can add extra drawing to make them look more real.
2007-03-29 08:23:09
·
answer #8
·
answered by gtavcking 3
·
0⤊
0⤋
prime a piece of plywood with mortar colored paint after it dries. with painters tape tape off a brick pattern and paint it a brick color when it is dry pull off tape and you have a wall
2007-03-29 12:34:36
·
answer #9
·
answered by John D S 1
·
0⤊
0⤋
got to a fake Lowe's or Home Depot
2007-03-29 08:20:09
·
answer #10
·
answered by lady l 2
·
0⤊
0⤋