2000 Mitsubishi Eclispe gt v6...just wondering how much for the parts and labor??? links would be nice or your source!
2007-03-29 04:32:46 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Mitsubishi
cuz i had this transmission specialty shop quote me at 1300 dollars ans that seems way too much!!!
2007-03-29 04:41:36 · update #1
First off, its going to depend on the labor rate at the shop. What kind of clutch assy they are using. Are they resurfacing the flywheel? Changing the pilot bearing?
I work in a transmission shop and I looked up the labor here and you would be looking at $740 in labor ( assuming this is a 3.0 and not a all wheel drive eclipse) with resurfacing the flywheel. I'm guessing the clutch assy would be around 2-300.
See what all is included in the labor, check the warranty and most definitely- have work done at a reputable shop!
2007-03-29 04:50:31 · answer #1 · answered by stayc 4 · 0⤊ 0⤋
call local parts stores. here are a few good ones ive used in the past: auto zone advanced auto pep boys napa etc. just do some comparative shopping and youll get a rough price range for a guide . as far as labor that can be as cheap as 100-300+ depending on how hard a job it is and where you get it done. ive had clutches changed before .ive owned between 100- 200 cars.
2007-03-29 11:39:28 · answer #2 · answered by Anonymous · 1⤊ 0⤋
you can do it yourself for about $100, most of the labor charge is to take the transmission out and put it back in. a new clutch will only cost you about 100-150 bucks
well, only do it if you have some experiance, its not hard but you will need typical wrenches and a breaker bar to take off the jv joints
2007-03-29 15:39:56 · answer #3 · answered by dragongml 3 · 0⤊ 0⤋