....to REPLACE the bulb, do I "PUSH" or "SCREW" it in?
2007-03-27 07:34:04 · 11 answers · asked by Anonymous in Entertainment & Music ➔ Polls & Surveys
just waggle it about a lot, it'll go in eventually
2007-03-27 07:38:07 · answer #1 · answered by Boofie 6 · 2⤊ 0⤋
Depends on the model of your car. If the tail light is the bulb type, as in round glass bulb with round metal housing, your push and turn the tabs into the groove.
If it's a tab kind as in all glass and shaped connector on the bottom, you just push it in.
Good luck. Good for you for doing it yourself.
2007-03-27 07:40:49 · answer #2 · answered by Dr. E. Bunny A.K.A. Andy. 7 · 1⤊ 0⤋
Depends on the bulb
2007-03-27 07:39:34 · answer #3 · answered by justweird_sodeal 3 · 1⤊ 0⤋
Push Down and Turn.
2007-03-27 07:46:52 · answer #4 · answered by Anonymous · 1⤊ 0⤋
Seems to me that you need a new SEXY car! Head lights now tail lights....
Though if you really need help I suggest "screwing" it in ;-)
2007-03-27 07:39:25 · answer #5 · answered by TJ 4 · 1⤊ 0⤋
push down, turn an pull out
then push back in turn your ready to go
2007-03-27 07:41:42 · answer #6 · answered by ____ 5 · 1⤊ 0⤋
you line up the notches with the opening and then twist
2007-03-27 07:48:11 · answer #7 · answered by ken s 6 · 1⤊ 0⤋
PUSH AND SCREW.
2007-03-27 07:38:13 · answer #8 · answered by ♥PopLock&DropIt♥ 4 · 1⤊ 0⤋
You must be very carefull in this area !
2007-03-27 08:10:38 · answer #9 · answered by Anonymous · 1⤊ 0⤋
Ask the employees at NAPA ...
2007-03-27 07:37:53 · answer #10 · answered by Anonymous · 2⤊ 0⤋