As long as the jewelry is real ... amonia will NOT hurt it. I soak my jewelry in amonia overnight once every 2 weeks.
Soak it overnight ... Take a old toothbrush & get in between all of the cracks & holes ... Rinse in warm water.
2007-03-27 05:56:05
·
answer #1
·
answered by cockfghtrgrlygrl 1
·
0⤊
0⤋
You can use a little White toothpaste not gel toothpaste then rinse in warm water or just a teaspoon of dishwashing liquid in some warm water in a dish and soak for about five minutes and use an old soft toothbrush to brush and clean around the gold avoiding any diamonds or semi precious stones will make your rings sparkle then rinse in cool water and dry with a soft cloth or allow to dry naturally.Don't use any of the tips others have described on Pearl jewelry as pearls are living and are very sensitive to cleaners but you can use the dishwashing liquid to clean them, but don't soak as you can damage the strands they are strung on. Good Luck !
2007-03-27 03:27:15
·
answer #2
·
answered by mshonnie 6
·
0⤊
0⤋
I just use a baking soda / water paste. You can use vinegar too, but I found the water with baking soda did just as good of a job without the vulcano effect vinegar and baking soda creates when mixed together.
Use an old toothbrush to get in the cracks. Make sure you plug up the sink when you rinse it off! :)
2007-03-27 03:27:53
·
answer #3
·
answered by KUJayhawksfan* 5
·
1⤊
0⤋
Toothpaste
2007-03-27 03:23:55
·
answer #4
·
answered by SALSA 6
·
0⤊
0⤋
previous toothbrush and heat soapy water (liquid cleansing soap), provide it a sturdy scrub often interior the lower back of the stone and dry on lint unfastened textile - watch it shine! in case you have had it a at the same time because it particularly is a robust time to income the claws (little beads of gold which carry the stone in place) are in sturdy condition. If there are the different stones interior the hoop, do no longer sparkling like this, diamond would not suggestions, yet another stones won't take it.
2016-10-20 01:19:44
·
answer #5
·
answered by archuletta 4
·
0⤊
0⤋
warm water and dish soap
no amonia, please...that stuff is harsh and useful but may damage the metal
warm water, toothpaste and a gentle brush with an old toothbrush is good too
2007-03-27 03:21:45
·
answer #6
·
answered by Library Eyes 6
·
0⤊
0⤋
If its sliver? I use vinegar and baking soda solution over top ofa wrinkled up sheet of alum foil as this causes the discharge of the unwelcome dirt and grime! if its gold? just soap and water, gold is not very porous as is silver~ a sonic denture cleaner works wonders on fine detal and getting clean behind stones in settings etc...
2007-03-27 03:24:45
·
answer #7
·
answered by The Thinker 6
·
0⤊
0⤋
Toothpaste, But not the whitening kind or the gel just regular toothpaste.
2007-03-27 03:26:54
·
answer #8
·
answered by Cheyenne 4
·
0⤊
0⤋
Try toothpaste and a soft toothbrush. Be sure to rinse well. (And make sure your sink drain is plugged before rinsing, so you don't drop it down the drain!)
2007-03-27 03:29:46
·
answer #9
·
answered by Anonymous
·
2⤊
0⤋
Just plain old ammonia works fine. Soak overnight.
2007-03-27 03:20:28
·
answer #10
·
answered by Mark G 4
·
1⤊
0⤋