we bough an used pool and have to remove it, but don't have manual and i dont want to pay since i have to pay to install it. can i get instructions on how to remove above ground pool somewhere i search everywhere in the internet and can't find anything. The pool 15"X 24" and 48" Deep. Any suggestions?
2007-03-27 02:49:34 · 4 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
After pool is drained remove coping (top plate all around pool) you'll see a plate about every 4 ft, undo the tabs underneath and they should come off, then you'll see machine head screws, unscrew and now the coping will come off in 4 ft sections,next remove the skimmer ( 6 screws), this should be a beaded liner and you will see the bead attached to the liner, pull it up and off the pool walls all the way around and be careful not to damage your liner, fold it up to the center and leave and don't be walking all over it. Now you should be able to dismantle the rest of the pool with no further instructions, the way you take it down is how you put it up. Good luck Les the painter.
2007-03-27 03:24:16 · answer #1 · answered by Les the painter 4 · 2⤊ 0⤋
remove the cap around the top that connects the liner to the pool walls
take out the liner
the metal pool walls have supports that join small sections...they may pop apart
just reverse the directions for putting one together
2007-03-27 10:26:09 · answer #2 · answered by Library Eyes 6 · 0⤊ 0⤋
it takes two people, first drain pool sub pump works best. remove pump and filter, top rail,pull out liner,then find where your sides are connected with small bolts remove ,continue arond removing bolts from support beams thats pretty much it.
2007-03-27 10:29:19 · answer #3 · answered by jtryo1 1 · 0⤊ 0⤋
Just take a sawzall and start cutting, if you aren't going to put it somewhere else!
2007-03-27 10:17:25 · answer #4 · answered by poppyman54 5 · 0⤊ 1⤋