The new tub faucet does work but it doesn't go all of the way on the pipe. Is there a sealant we can put behind it? With the old faucet it had an extended pipe. We tried to twist it off but it is securely on! What should I do? The tub faucet that was there is an antique!
2007-03-27 01:43:14 · 3 answers · asked by eicholtz_1957 1 in Home & Garden ➔ Maintenance & Repairs
It is difficult to be sure but I think you are talking about the spout which is more or less modern style. When you removed the old spout, a 4 inch long 1/2 inch galvanized pipe remained. You haven't been able to unscrew this pipe and the new spout has its threaded connection more near its base. If this is true, you have two options. 1. Get a spout matching the old spout. 2. Remove the galvanized pipe extension. I recomend heating it with plumber's torch. Then install a pipe extension of suitable length for the new spout.
It is very possible this is in fact not your problem. If so you should use more precise descriptive terms. Also try the local ACE hardward.
2007-03-27 01:56:10 · answer #1 · answered by bhodie1 2 · 0⤊ 0⤋
Galvanized pipe is known for rusting and "freezing" in the threads. If you cannot remove the spout pipe, measure how much space you have between the new spout and the wall (when screwed on all the way). Then rent a pipe die and handle. Cut off the amount of pipe equal to the distance between the wall and new spout. Cut new threads on the pipe and you should be good to go.
2007-03-27 02:42:06 · answer #2 · answered by sensible_man 7 · 0⤊ 0⤋
hi
you must have galvanize pipes .
they area source of rust and clogging.
not to good for the heath If possible i would recommend replacing the pipes with flex or copper
been there done that
2007-03-27 01:57:29 · answer #3 · answered by pcc122 4 · 0⤊ 0⤋