English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

9 answers

For dark finishes, if the marks can't be removed without totally refinishing, I would try applying some "Old English" dark furniture polish. It's similar to furniture staining, and works great to hide lighter spots and scratches, while blending in with the rest of the wood finish. (You may want to test it first to see if it will give the desired result.)

Oil and vinegar has also worked for me. Put a bit of both on rub in and wipe off with a cloth.

2007-03-27 01:58:58 · answer #1 · answered by mikeybetsy 2 · 0 0

The most important ways that the people can combat global warming is getting rid of their older model cars (1979 Buick) because, older cars emmitt more toxic fumes into the air. Its obvious that the more technological advanced a car is, the less harmful gases it emmitts. A car that was built 3 or 4 years ago will be more economy friendly than a car that was assembled 35 years ago. For high populated cities such as New York, Bus and Taxi companys should replace current vehicles with cars that are powered by hydrogen or electricity. Just think, if every major city used the Toyota Prius as taxi's, there would be a decreased level of pollution, and also taxi fares could be drastically lower as well.

2016-03-17 03:07:04 · answer #2 · answered by ? 4 · 0 0

One way to remove white water stains from wood is to use an hot iron on a smoothly-textured, lint-free cloth placed over the stain, iron very briefly (seconds), lift the cloth, and repeat until stain is gone. It really works!

2007-03-27 04:28:26 · answer #3 · answered by moghusai 4 · 0 0

The light color is caused by moisture that has entered through the finish....try lightly rubbing alcohol over the area. As it evaporates, it should also draw out the moisture as well. There is also a product (I saw it at Lowes last week) that claims to remove water marks...I imagine it has some sort of chemical that also evaporates the moisture...

good luck

2007-03-27 02:23:41 · answer #4 · answered by stretch 7 · 0 0

Mix a little cooking oil with quite a lot of cigarette ash; rub into stain and then buff with soft cloth. Stain will disappear as if by magic!

2007-03-27 10:26:02 · answer #5 · answered by lix 6 · 0 0

Use Wood Buff , made by Amway on the wood surface to remove the water stain plus enrich the wood grain!

2007-03-27 01:35:44 · answer #6 · answered by thegentle Indian 7 · 0 0

Sometimes using the brasso polishing wadding will do the job, works great on cup rings as well.It may be that the lacquer is damaged though and then its a strip and french polish job. Try the brasso though, it can be very effective.

2007-03-28 00:53:47 · answer #7 · answered by Anonymous · 0 0

A little Brasso on a soft cloth - go carefully! It works a treat.

2007-03-27 02:26:47 · answer #8 · answered by Anonymous · 0 0

use some wax for dark wood on it. it should help.

2007-03-27 01:33:26 · answer #9 · answered by angel 4 · 0 0

fedest.com, questions and answers