Turn the encryption on. And create a complicated password to log on.
2007-03-26 15:44:18
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
Check your router.manual. Depending on the age, make and model, you may be able to use WEP or WPA encoding. This will lock out any computer that doesn't have the password or passphrase.
You can also initialize your system so that it will only allow certain computers to logon.
This stuff is a little complicated, so be prepared to spend some time with your router manual, or invite a geeky friend over to help.
Good luck :>)))
2007-03-26 15:46:24
·
answer #2
·
answered by Icanhelp 3
·
0⤊
0⤋
Just connect to your wireless router's setting through the IP address provided in your router's manual, you connect to the IP using a web browser like Internet explorer. If your router has WEP or WEP2 security, then you can setup a password so no one other than you and who knows the password can use the network,,
Hope this helps & good luck,
2007-03-26 15:43:25
·
answer #3
·
answered by ..::|QATAR|::.. 4
·
0⤊
0⤋
u mean no one else can access the intertnet. u need to logon to ur router and enable the wireless security...
2007-03-26 15:44:19
·
answer #4
·
answered by Sagar 6
·
0⤊
0⤋
Go into your settings and turn on WPA encryption and have a good password.
2007-03-26 16:25:35
·
answer #5
·
answered by Mark 4
·
0⤊
0⤋
look in your manual then you should see a ip address type that in and type in the password . then follow the direction if you lost your manual you should go to the company website and read it..
2007-03-26 15:58:18
·
answer #6
·
answered by Mr.Shabaaka 1
·
0⤊
0⤋