I have a 1985 ford f150 pick up truck and my father just put my clutch in and now it has air in the lines. I need to know how to bleed it? Thanks so much.
2007-03-26 14:55:54 · 2 answers · asked by angelzoya03 1 in Cars & Transportation ➔ Maintenance & Repairs
There should be a bleeder screw on the slave cylinder, just have someone pump the pedal 5 times or so and crack the screw. remember (pump,hold,release and repeat) until there is no bubbles and you should be all set.
2007-03-26 15:01:51 · answer #1 · answered by Bill L 3 · 0⤊ 0⤋
in case you're asking this question because of fact of having complication find the starter, then stick to this easy handbook-line: The "helpful" battery-cable will continually lead directly to the solenoid. And the secondary super cable (cord) that connects to the solenoid, will lead you directly to the starter. All you're able to do is stick to the cable (cord). each frequently occurring motor vehicle in the international is under pressure out after this way. many times the starter is placed on an analogous side as your battery and, as I point out the battery, be optimistic to disconnect the helpful (pink) battery cable till now doing any paintings on the starter to steer clear of electric powered shorting and/or burns or fires. I had a battery exploded in my face years in the past...it grew to become into simular to a 12-gauge going off.
2016-12-19 14:42:30 · answer #2 · answered by ? 4 · 0⤊ 0⤋