i drive a 2000 monte carlo ss and i already have a k&n cold air intake and i have a exhaust on the way but i still want it to go faster what can i do???
2007-03-26 12:17:41 · 3 answers · asked by pattym08 2 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
Buy yourself one of the aftermarket downloadable programs that is a software chip. It resides in the box you buy and can switch it back and forth with the original if and when you want. You can also alter the performance program with different selections on the box screen which will prompt you. These can void warranties so before going in for any warranty repairs, revert to your old factory program. These give fairly good bang for your buck. They are very easy to use and change also. Good luck.
2007-03-26 12:48:49 · answer #1 · answered by Deano 7 · 0⤊ 0⤋
The others replied your first question exceedingly plenty. i do unlike Flowmaster individually, yet to each his very own. besides, on your 2nd question, you will possibly be able to properly be pushing between 205-215 hp. genuinely, a catback and a clean ok&N clear out do no longer account for plenty. i might look into some headers and in line with possibility a extra aggressive cam. you will possibly be able to additionally look right into a nitrous setup for acceleration. the only element which will help your ideal end would be extra potential and decrease gears, besides the fact that decrease gears will decrease into your acceleration, slightly (a V6 is purely no longer dealing with adequate potential to word plenty shrink). Acceleration vs. ideal end - you many times won't be able to have the two, so %. one and decide for it, or stay contained in direction of the two.
2016-10-20 12:26:13 · answer #2 · answered by corridoni 4 · 0⤊ 0⤋
or you could install a larger intake flange. or maybe supercharge it. or modify the head to get higher compression ratio.. use roller rockers........
2007-03-29 22:27:47 · answer #3 · answered by charlie 5 · 0⤊ 0⤋