how do you attach suspender belts to stockings?? pleasssse help!?

Question

bought a corset with belts attached to it, i want to attach it to stocking.... how does it work??

(ive never worn anything sexy before!!) lol

i cant seem to open any of the four clips??

i must be doing something wrong...
theres a ribbon, then clip then another ribbon... the clip is on a sheet of rubber.... is this right??

howww do u open the clip?

Shut the f u ck up 'exterminator' who cares what u think anyway u a ss

Answer 1

OK. Put on your corset and get it so the belts hand down from it. Don't lace it up tight yet. Put on your stockings and see how high the top of the stockings are. The top usually have a band that has more fabric and is a bit more durable than the sheer nylon elsewhere on the stocking. Make sure the little straps from the suspender hang down so that the clips are a little bit above the top of the stockings, I'd guess maybe about two inches on the front straps. You want tthe clips on the belt to be a bit above the stocking because you will need to pull it down to the stocking to clip it on so they provide the tension to pull the stocking up when you are done. The ones in the back will need to hang higher from the back of the stocking. The straps on the back will need to be adjusted so they are longer than the front ones. You need to get them to go over your tush, which is longer than just going straight down in the front. Because they are longer, you need to stretch them more to get the same tension in the strap, which is why you also want the longer straps in the back to hang higher above the top of the stocking than the front ones. I would guess the ones in the back might need to be like 4 inches above the top of the stocking. The first time you do this, you might be playing and adjusting this thing for a while to get it just right. Then you just leave the straps alone.

Now you can lace up the corset and then put on the clips. Or you can cheat and put the clips on, adjust position of your corset and lace it up. I usually cheat.

The clip usually is a metal piece with what looks like a key hole. The other piece is usually a piece of flexible plastic, like silicone rubber. It has a round button sticking out on it. How it works is the round button goes into the larger hole in the metal flat and then slide into the slot. To open it, you just slide the rubber button out to the hole and it comes out. So open up the clip by sliding the rubber part out of the flat metal clip. Pull the strap down to the top band of your stocking. Put the rubber/plastic part on the inside. There should be a little piece of satin ribbon or some fabric too on the inside so your skin doesn't rest right against the plastic. Then you bring the metal clip on the outside on top, over the stocking now covering the round plastic button. Push the button with the stocking on top into the hole in the metal hole and slide it into the slot. It should kind of tight and might be harder to do now that there's extra material, but you shouldn't rip anything. That's why the thing is made of silicone and the top of the stocking is heavier. Bring the little flaps ribbon or whatever they happen to be made and cover up the clips. Do this for all the straps. The ones behind you are kind of a pain, by the way. It takes a contortionist to do them sometimes. When you have all the clips on, just adjust things to get them to sit right and pull up your stocking evenly.

I think that's pretty much it. If your clip works some other way, then I have no idea. I've only see the kind that I described.

Answer 2

Stockings And Suspender Belts

Answer 3

First, let the straps down and then you pull the little button part up to the wide part of the clip, and it will pop out. Do this before you put the corset on. Then just put the corset on and slop the little button under the stocking and push it down to the narrow part of the clip. Then, pull the the straps all the way up to keep the stockings tight, and that will keep the button in the narrow bottom of the clip.

I wear stockings and a garter belt every day to work, and they are so much more comfortable than dreaded pantyhose. You will get use to it and love it.

Answer 4

The pieces that hang down one in front one at back of each leg have a clip on them, you put one piece under stocking and clip the top over like doing up a button with the stocking top sandwiched between

Answer 5

put the suspender belt on first,then pull stockings on,one at a time attach the stockings by putting the small rubber fitment behind the top of the stocking and then push through to the fastener on the outside and slide the round part down as far as it will go, then do this to the back suspender and repeat for the other leg,you might want to put your knickers on last as you will have problems going to the loo otherwise.

Answer 6

This Site Might Help You.

RE:
how do you attach suspender belts to stockings?? pleasssse help!?
bought a corset with belts attached to it, i want to attach it to stocking.... how does it work??

(ive never worn anything sexy before!!) lol

Answer 7

You clip them onto to top of the stockings!! Make sure you put them under your knickers if you are wearing them for a while as you will be unable to go to the toilet without having to undo everything

Answer 8

Place the white tab side under the stocking and place the bracket side over the top of the stocking and pull the bracket onto the tab with the stocking in between. (Sorry to say they aren't real big on comfort tho ! But I guess if you wanna be sexy .......

Answer 9

You've gotto slide clip the belt to the top of the stocking!!

Answer 10

look at the suspenders and you will see a round bit sticking out of the key hole shapped bit slid it out to the bigger bit and it will fall out