In the main computer where the printer is installed, just go to the Printer folder inside of Control Panel. Right click your All in one printer and then Click Sharing. Click on Share this printer in the window that opens and then hit OK.
Get the IP address of your computer, go to Start, Run, type "cmd" enter, type "ipconfig" enter. Write down where it says "Local Area Connection" IP address: "numbers with dots". After this, move to the computer without a printer.
In the other computer, go to Start, Run, type "\\ipaddress\" where ipaddress are the numbers of the 1st computer. When a windows opens asking for a user name and password input those credentials from your computer. If it doesn't ask it will be even better. Now with this command you will open a folder and the printer will be there. Double click the printer and now the 2nd computer will be able to use it.
BTW, both computers have to be in the same WORKGROUP. to check this: Right click My Computer icon on the desktop, go to properties, Computer name tab. There you can see the WORKGROUP name and even change it.
2007-03-28 22:26:50
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
If you have a switch, then you will need to set one of your machines up as a gateway. The easiest way is to run the Windows home network setup wizard under networking.
Pick your fastest machine and set that up as the gateway. The wizard will also let you create a setup disk to get the network up and running quickly on the other machines.
It is a heck of a lot easier to do this with a router. You should consider getting one if you can - they run about $50US.
Print sharing will be the same for both setups (switch or router). Unless you have a network printer (with an Ethernet plug on it) then you will set the printer up as "Connected to another machine" on the network.
First, on the computer that has the printer already installed, right-click on the printer and enable Sharing. Then, once you have your network setup, any other computer can print to it once you install the printer via the Printer Setup wizard on each machine. It will be a Network printer.
2007-03-26 02:21:19
·
answer #2
·
answered by wyntre_2000 5
·
0⤊
0⤋
You don't necessarily need a server to allow multiple machines to print to one networked printer. I'm assuming the printer has some type of network card. Assign the printer a private static IP address (not the public one assigned to you from your ISP). On each of the four pc's, install the printer as a local printer using the printer's drivers, and choose a Standard TCP/IP port as the port type. Type in the static IP address of the printer, and follow the installation wizard to completion.
Refer to the following for more info:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_add_tcpip_port.mspx?mfr=true
2007-03-26 02:23:31
·
answer #3
·
answered by jacksophone 2
·
0⤊
0⤋
the multi-port gadget probably a router. It has a WAN port this is linked to the internet and four-5 documents ports. The community would not prefer a domicile windows Server working device to function. you're able to have a "Workgroup" of computers. the optimum pc is probably sharing documents and printers. In a workgroup, you should create consumer bills on each and each pc and setup the permissions on the "important" pc to permit all and sundry or create the comparable consumer bills on it. In an internet site, utilising the domicile windows Server OS, you could create area bills and upload all computers to the area. This makes administration and assigning permissions plenty much less confusing. The small workplace would not prefer a undeniable server. they like to maintain it user-friendly.
2016-12-15 09:08:45
·
answer #4
·
answered by fette 4
·
0⤊
0⤋
jezzz, u must be relly dumb to ask this type of question, a network with server??????, get a life, men
2007-03-26 03:16:48
·
answer #5
·
answered by BIG D 2
·
0⤊
1⤋